|
RF Custom Switch Products
The Giga-tronics' ASCOR Series 8000 line of switch products are based on rugged electromechanical switches and microwave relays rated for use from DC to 40 GHz with low insertion loss and high isolation route signals under remote control to simplify and improve automated test systems.
The standard Series 8000 offers GPIB, USB and Ethernet LAN communication interfaces. A self-contained design, with built-in power supplies, microprocessor controller board and up to 256 relay coils, makes it very easy to implement a microwave switch system. It is design to host all combination of microwave relay switches, terminated or non-terminated: SPDT, SP4T, SP6T, SP8T or Transfer switches. With a standard SCPI commands, the control interface provides with the ASCOR Series 8000 for ease of operation and configurability.
With the flexibility and versatility design, the Series 8000 is ideal platform for custom applications. It is geared to control any or all of the various switch types on the front panel or host switching system internally. The Series 8000 switch assemblies are supplied in standard light-weight enclosure and can be mounted in half or full width rack from 2U to 7U. Easily removable switches allow reduced mean time to repair.
 |
Model Series 8000 - GPIB
Self-contained RF switch unit, half rack, 2U, SP4T, SPDT
Overview
A self-contained RF switch unit with GPIB interface, half rack, 2U high with
two SP4T and two SPDT microwave switches at 26.5 GHz. Unit can be a full rack
size depending on th number of RF switches desired.
|
 |
Model Series 8000 -
GPIB Optical
Half rack, 2U high, Optial SPDT switch
Overview
A half rack, 2U high switch system that is optial SPDT switch. These units
can have GPIB or Ethernet LAN interfaces. it was designed to test optical
products by switching various test signals and measured signals.
|
 |
Model Series 8000 -
LAN
Full rack, 3U, sixteen 1x8, 18 GHz RF switches, DC to 40 GHz
Overview
A full rack width, 3U high unit with sixteen 1x8, RF switches, 18 GHz. Also
awailable with eight 1x8 RF switches. Front panel can be changed to meet
customer's design requirements.
Features
- An easy-to-use web based interface that allows the customer to painlessly
setup and configure the module
- Control microwave switches from a computer using Ethernet network
- The LAN is VXI-11.3 compliant and it is compatible with ATE systems that use
TCP/IP networks
|
|
|
|
|
