|
|
- Freq. Range : 30MHz to 40GHz - Power Range Pulse : -20dBm to +20dBm CW : -40dBm to +20dBm - Accuracy : Uncertainty due to Zeroing and Noise CW(Avg.=500) : <±10nW, 15 to 50¡É; <±20nW, 0 to 15¡É Peak(Avg.=100) : <±3.5§Ð, 15 to 50¡É; <±5.0§Ð, 0 to 15¡É Single Pulsek(typ.) : <±15§Ð, 15 to 50¡É; <±30§Ð, 0 to 15¡É - Model : 8501A(1Ch), 8502A(2Ch)
Giga-tronics 8500A Series
Peak Power Meters combine CW power measurement with the ability to make precise
peak power measurements at any point on a pulsed waveform. This dual, built-in
capability lets you make CW measurements and analyze pulsed waveforms with a
single instrument.
The
meter is available in a single or dual channel configuration. A built-in display
shows measurements such as rise time, fall time and pulse width plus the pulse
profile. And you can use a reference cursor to read peak power at any point on
the pulse waveform.
Giga-tronics CW and Peak power sensors contain an EEPROM programmed with
the frequency calibration factors measured at the factory, or in your cal lab.
When you key in the frequency at which power is being measured, the meter
automatically applies the correct cal factor from the sensor EEPROM.
- Rise
time < 15 ns
- Sensor frequency range from 0.03 or 0.75 to 18.5, 26.5 or 40 GHz
- Power Range: -20 to +20 dBm Pulse; -40 to +20 dBm CW
- Measurement resolution is 100 ps
- Measure the same point on repetitive pulses at over 70
measurements/second
- Built-in power sweep calibrator with NIST traceable accuracy
|
Warranty
|
1³â
|
|
8501A
|
8502A
|
»çÀ̹ö°ßÀû´ã±â
|
|
|
¸ðµ¨
|
±¸¼º / ¼³¸í
|
»çÀ̹ö°ßÀû´ã±â
|
Opt. 01
|
Rack Mount Kit
|
|
Opt. 03
|
8501A Rear Panel Sensor and Calibrator Connections (deletes all front panel connectors)
|
|
Opt. 03
|
8502A Rear Panel Sensor Connector Only (calibrator remains on front panel)
|
|
Opt. 10
|
Fimware Version 2.10A - fast analog operation (see note below)
|
No Charge
|
16956-001
|
Sensor Cable, 1.5 Meters (5 feet)
|
|
16956-002
|
Sensor Cable, 3 Meters (10 feet)
|
|
32353
|
8500 Series Calibration Kit
|
|
20790
|
Extra Operation & Maintenance Manual for 8500A
|
|
EWS20
|
2 Year Extended Warranty
|
¹®ÀÇ
|
|
Per Unit Production Test Data
|
¹®ÀÇ
|
|
Per Unit Equipment Traceability List
|
¹®ÀÇ
|
|
»çÀ̹ö°ßÀû´ã±â
|
16934A
|
Standard Peak Power Sensor, 750 ns, 30 MHz to 18 GHz, N(m)
|
|
16935A
|
Standard Peak Power Sensor, 750 ns, 30 MHz to 18 GHz, APC-7
|
|
17267A
|
Standard Peak Power Sensor, 750 ns, 30 MHz to 26.5 GHz, K(m)
|
|
16936A
|
Fast Rise Time Peak Power Sensor, 15 ns, 750 MHz to 18 GHz, N(m)
|
|
16937A
|
Fast Rise Time Peak Power Sensor, 15 ns, 750 MHz to 18 GHz, APC-7
|
|
17266A
|
Fast Rise Time Peak Power Sensor, 15 ns, 750 MHz to 26.5 GHz, K(m)
|
|
17071A
|
Fast Rise Time Peak Power Sensor, 15 ns, 750 MHz to 40 GHz, K(m)
|
|
Warranty
|
1³â
|
Power Sensors °øÅë Option
|
»çÀ̹ö°ßÀû´ã±â
|
EWS20
|
2 Year Extended Warranty, For 18GHz Sensors (except high power)
|
¹®ÀÇ
|
EWS20
|
2 Year Extended Warranty, For 26GHz Sensors (except high power)
|
¹®ÀÇ
|
EWS20
|
2 Year Extended Warranty, For 40GHz Sensors (except high power)
|
¹®ÀÇ
|
EWS20
|
2 Year Extended Warranty, For High Power Sensors
|
¹®ÀÇ
|
|
Per Unit Production Test Data
|
¹®ÀÇ
|
|
Per Unit Equipment Traceability List
|
¹®ÀÇ
|
|
|
|
|