¸ðµ¨
|
±¸¼º / ¼³¸í
|
GT-1051A
|
10MHz to 50GHz
|
Output Power
Output power is specified as minimum saturated power into 50 Ohm load with +5 dBm input, at 23°C ± 5°C Input power for normal operation should be limited to +20 dBm maximum.
Range
|
Specification*
|
10 MHz to 100MHz
|
+24 dBm (250 mW) typical
|
100 MHz to 2GHz
|
+27 dBm (500 mW) typical
|
2 to 10GHz
|
+30 dBm (1 Watts) nominal, +26 dBm (400 mW) minimum
|
10 to 30GHz
|
+28 dBm (600 mW) nominal, +25 dBm (300 mW) minimum
|
30 to 40GHz
|
+27 dBm (500 mW) nominal, +23 dBm (200 mW) minimum
|
40 to 50GHz
|
+24 dBm (250 mW) nominal, +20 dBm (100 mW) minimum
|
Gain Flatness
Nominal gain is 25 dB, minimum gain > 20 dB. Gain flatness is specified as maximum variation with -5 dBm input and 50 Ohm load.
Range
|
Specification
|
10MHz to 100MHz
|
± 3.5 dB typical
|
100MHz to 2GHz
|
± 2.5 dB typical
|
2 to 40GHz
|
± 2.5 dB nominal
|
2 to 50GHz
|
± 3.5 dB nominal
|
Input and Output VSWR
|
100MHz to 1GHz
|
1 to 2GHz
|
2 to 30GHz
|
30 to 40GHz
|
40 to 50GHz
|
Input, 50 ohms
|
2.3:1 typical
| 2.0:1 typical
|
1.5:1 nominal
|
2.0:1 nominal
|
2.3:1 nominal
|
Output, 50 ohms
|
4.5:1 typical
| 2.9:1 typical
|
2.0:1 nominal
|
2.3:1 nominal
|
2.9:1 nominal
|
Additional Specifications
Parameter
|
Specification
|
Stability
|
Unconditionally Stable
|
Maximum Load VSWR
|
3:1
|
Maximum Input Power
|
+20 dBm
|
Third Order Intercept
|
+37 dBm nominal
|
Harmonic Distortion*
|
< -30 dBc nominal
|
Spurious*
|
< -60 dBc nominal
|
Reverse Isolation
|
> 50 dB
|
Noise Figure
|
< 10 dB nominal, < 14 dB maximum
|
* Note : Harmonics measured at +10 dBm output power. Spurious measured at -5 dBm input power level
General Specifications
Line Voltage
|
100 to 240 VAC, 47 to 63 Hz, Single Phase
|
Line Power
|
20 VA maximum
|
Operating Temperature
|
0°C to +50°C
|
Storage Temperature
|
-20°C to +75°C
|
RF Connectors
|
Input 2.4mm(f)
|
Output 2.4mm(f) compatible 1.85mm(f) V Connector
|
|