Model Number
|
Freq. Range
|
RF Output Connector
|
2502B
|
100kH to 2.5GHz
|
Type-N (F)
|
2508B
|
2GHz to 8GHz
|
Type-N (F)
|
2520B
|
2GHz to 20GHz
|
SMA (F)
|
2526B
|
2GHz to 26.5GHz
|
SMA (F)
|
2540B
|
2GHz to 40GHz
|
2.92 mm (F)
|
2550B
|
2GHz to 50GHz
|
2.4 mm (F)
|
Frequency
Range (with Option 18)
|
2502B
|
100kHz to 2.5GHz
|
2508B
|
100kHz to 8GHz
|
2520B
|
100kHz to 20GHz
|
2526B
|
100kHz to 26.5GHz
|
2540B
|
100kHz to 40GHz
|
2550B
|
100kHz to 50GHz
|
Freq. Accuracy
|
Same as time base
|
Freq. Resolution
|
0.001Hz
|
Power Slope
|
0 to 0.5 dB/GHz
|
Frequency Stability
Internal Reference Output
|
10MHz
|
TTL level into 50ohm
|
100MHz
|
>+5dBm square wave into 50ohm
|
Aging Rate *1
|
< 5 x 10-10/day
|
Temperature Stability *2
|
< ± 2.5 x 10-8
|
External Reference Freq. Input
|
Frequency
|
10MHz or 100MHz
|
Frequency Deviation
|
±1 ppm
|
Recommended Input Level
|
> -5dBm into 50ohm for 10MHz
|
> +5dBm to +8dBm into 50ohm for 100MHz
|
Reference Tuning
|
Voltage Range
|
0 to 10V
|
Sensitivity
|
0.50V/GHz, 0.01 to 20GHz
|
0.25V/GHz, 20 to 50GHz
|
Lock/Level Indicator (CW Mode Only)
|
Sync Out = +5 V (TTL High)
|
*1 After 30 days *2 Temperature stability over operating range of 0°C to +55°C after 30 days
|
Overview
The 2500 series signal generator delivers industry-best offset phase noise performance, high output power, and fast frequency switching speeds in a single unit. 2500 Series signal generators are offered in two different configurations designed for bench top and ATE applications covering 100 KHz to 8 GHz, 20 GHz, 26.5 GHz, 40 GHz and 50 GHz with frequency resolution of 0.001 Hz over the entire band. Loaded with standard performance features such as high time base stability, frequency modulation (FM), high-speed pulse/square wave modulation (PM), amplitude modulation (AM) and high leveled output power makes it an excellent test solution for a wide range of CW, modulation, swept frequency, and fast frequency switching applications in both R&D and manufacturing environment.
Key Features
- Frequency ranges : 100 kHz to 50 GHz with 0.001Hz resolution
- Fast Frequency and Level switching time : < 550 ¥ìsec for ¥ÄF0¡Â
500 MHz
- Ultra-low Close-in Phase Noise
- High output power : +13 dBm at 50 GHz
- Full Suite of Analog Modulation
- Low Harmonics, Low Spurious
Advanced Synthesizer Technology
The 2500 series signal generator utilizes new Advanced Synthesizer Technology that delivers excellent close in phase noise performance of -77dBc @ 100 Hz and -96dBc @ 1kHz and an ultra low phase noise performance of -109 dBc @ 10 kHz and 100 kHz offset on a 10 GHz carrier frequency.
Faster to Program
Every 2500A signal generator comes with Giga-tronics Automation Xpress, a PC based software package designed for enhanced user interface and automatic test systems. The Automation Xpress CD includes a full-featured plug-and-play driver and soft front panels to provide the ATE system integrator with everything needed to get up and running fast. A comprehensive LIST mode, Command-Line interpreter with script and loop capability, and GPIB traffic monitoring are just a few of the many features a test system programmer will appreciate when developing and debugging Test Program Sets.
Excellent Value
The 2500 series signal generator is a unique blend of performance, reliability and a simple user interface that helps our customers lower their overall cost of ownership by shortening instrument-learning time and reducing systems integration effort through Automation Xpress¢â on a system that is backed by excellent standard warranty.
Compatibility
The 2500 series unit has full command compatibility with 2400 series and previous generation signal generators from Giga-tronics. In addition, Giga-tronics offers optional command set for legacy signal generators offered by other manufacturers allowing customers to replace all legacy signal generators with single unit from Giga-tronics.
|
|
¸ðµ¨
|
±¸¼º / ¼³¸í
|
Opt. 17A
|
Add Internal and External Modulation Suite (includes internal function generator)
|
Opt. 17B
|
Add External Modulation Suite
|
Opt. 18
|
Add 100kHz to 2GHz Freq. Range (Standard on the 2502B model)
|
Opt. 22
|
Add Rear Panel RF Output Connector
|
Opt. 23
|
Add Type-N Connector, for 2520B only
|
Opt. 26A
|
Add 90dB Mechanical Step Attenuator, for 2502B, 2508B, and 2520B models
|
Opt. 26B
|
Add 90dB Mechanical Step Attenuator, for 2526B model only
|
Opt. 26C
|
Add 90dB Mechanical Step Attenuator, for 2540B model only
|
Opt. 26D
|
Add 90dB Mechanical Step Attenuator, for 2550B model only
|
Opt. 27
|
Add 110dB Electronic Step Attenuator, For 2502B and 2508B only
|
Opt. 28
|
Add Ultra-Low Close-In Phase Noise
|
Opt. 31
|
Add Switching Speed > 2ms and pulse Width >100ns
|
Opt. 43
|
Add Analog Sweep
|
Opt. 44
|
Replace Standard Front Panel with Blank Front Panel (Requires Option 22)
|
Opt. 46
|
Add Rack Slide Kit
|
Opt. 55X
|
Add Emulation Command Set (See ordering information for detail)
|
|