Direct_market

직거래장터

　

　

주의사항 및 이용안내
주의사항
  • - 본 직거래장터 게시판은 이용 고객님간의 개인 신용 직거래 입니다.
  • - 거래에서 생긴 불이익에 관해서 당사는 책임이 없음을 공지드립니다.
  • - 거래전에 서로에 관해 충분히 알아보시고 거래하는것을 권해드립니다.
  • - 본 란의 취지에 부합되지 않는 내용에 관해서는 임의로 삭제 될 수 있습니다.
이용안내
  • - 구매/판매가 완료되면 진행상황을 '완료'로 표기하여 주시기 바랍니다.
  • - 당사에서 작성한 글은 '관리자'로 표기되며, 구매/판매에 관하여 일체
    관여하지 않습니다.
  • - 홈페이지 회원 가입을 통해 직접 등록한 직거래장터 게시물을 관리할 수 있습니다.
직거래이용 도움 가이드
직거래장터 게시판
상　 태 판매완료
번　 호 92160
제　 목 Agilent/HP 8903B
등 록 일 2022-05-30 오전 11:22:39
등 록 인 Lee
제품정보
 Agilent/HP 8903B
System Specifications
Distortion
Residual Distortion and Noise (the higher of):
80 kHz BW: ?80 dB or 17 mV, 20 Hz to 20 kHz
500 kHz BW: ?70 dB or 50 mV, 20 Hz to 50 kHz
?65 dB or 50 mV, 50 kHz to 100 kHz
Source Specifications
(8903B only)
Frequency
Range: 20 Hz to 100 kHz
Accuracy: 0.3% of setting
Output Level
Range: 0.6 mV to 6 V open circuit
Accuracy: 2% of setting 60 mV to 6 V, 20 Hz to 50 kHz
Flatness (1 kHz reference): ±0.7% (±0.06 dB), 20 Hz to 20 kHz
Distortion and Noise (the higher of):
80 kHz BW: ?80 dB or 15 mV, 20 Hz to 20 kHz
500 kHz BW: ?70 dB or 38 mV, 20 Hz to 50 kHz
?65 dB or 38 mV, 50 kHz to 100 kHz
Analyzer Specifications

Distortion
Fundamental Frequency Range: 20 Hz to 100 kHz
Accuracy: ±1 dB, 20 Hz to 20 kHz
Residual Distortion and Noise (the higher of):
80 kHz BW: ?80 dB or 15 mV, 20 Hz to 20 kHz
500 kHz BW: ?70 dB or 45 mV, 20 Hz to 50 kHz
?65 dB or 45 mV, 50 kHz to 100 kHz

SINAD
Fundamental Frequency Range: 20 Hz to 100 kHz
Residual Distortion and Noise: Same as listed under distortion
Accuracy: ±1 dB, 20 Hz to 20 kHz
AC Level
Full Range Display: 300.0 V, 30.00 V, 3.000 V, 0.3000 V, 30.00 mV,
3.000 mV, 0.3000 mV
Accuracy: (rms and average detection)
±2%, 50 mV to 300 V, 20 Hz to 20 kHz

DC Level
Full Range Display: 300.0 V, 48.00 V, 16.00 V, 4.000 V
Accuracy: ±1.0% of reading (600 mV to 300 V)
±6 mV (Vin <600 mV)
Frequency Measurement
Measurement Range: 20 Hz to 150 kHz (20 Hz to 100 kHz in distortion
and SINAD modes)
Accuracy: ±(0.004% plus one digit)
Standard Audio Filters
30 kHz Low-Pass Filter
80 kHz Low-Pass Filter
Plug-In Audio Filters
400 Hz High-Pass Filter
CCITT Weighting Filter (CCITT rec. P53)
CCIR Weighting Filter (CCIR rec. 468-2)
C-Message Weighting Filter (per BSTM 41004)
CCIR/ARM Weighting Filter (CCIR rec. 468-2, average-responding
meter, Dolby Labs Bulletin No. 19/4)
“A” Weighting Filter (IEC rec. 179 and ANSI
S1.4, type one soundlevel

meter)

Analyzer Input
Input Type: Balanced (full differential)
Maximum Input: Maximum peak input voltage, any combination
of ac and dc: 425 volts peak, applied differentially or between
either input and ground
가　 격 70
제품이미지