제품정보
(메이커/스펙/옵션/액세서리/장비상태 등) |
STAG P801
생산용 4갱 프로그래머 (8비트,32핀 이하 8갱 가능)
스탠드얼론으로 동작하며 PC와 연결 사용도 가능함
초고속 프로그래머로 8/16/32/64 메가 플래시메모리에 적합
본체와 4소켓 모듈 어뎁터 한개를 사용
[특 징]
Very fast programming with high performance pre-checks and post programming checks
Stand Alone or PC remote operation
Easy expansion for package styles up to 56 pin
Modules can be changed quickly and easily
Modules provide reliable contact, no adaptors required
Easy download via RS-232
Optional High Speed IEEE1284 parallel port
[Programming Features]
High Speed programming to manufactures certified specification.
Pre-Program checks are selectable (empty check, bit check, or none).
Verify Margins can be modified from approved algorithms to marginal conditions (+/- 10% deviation from normal).
Security Lock (sector protect) will disable both program and erase operation in any number of available sectors for in-circuit programmable devices.
Device Check for correct insertion and faults.
Bus Isolation for data integrity with 208 drivers built in.
Turbo Charge Modes in addition to the inherent high speed two features are embodied:
1.Skip- where the programmer does not attempt to program empty locations.
2.Memory Mapping - which allows areas of the programmable device not used to be excluded from the program, erase and verify field, thereby increasing throughput proportionally.
[Support]
4 sockets in gang or set and up to eight sockets in gang mode depending on plug in module.
EPROMS, EEPROMS, FLASH, Serial EPROMS, and Microcontrollers.
Package Types DIP and PLCC (no third party adaptors required).
Low Voltage Technologies - all voltages from 2.0V up to 7.0V enabling support of 2.4V and 3.3V technologies.
8, 16 and 32 bit modes.
[Operating Benefits]
User set-up restored on power up.
Low cost of ownership and low cost module configurations.
Memory device data editing tools include:
1.List or Change Data.
2.Insert/delete Bytes.
3.Fill Ram.
4.Block Move.
5.String Search.
Edit functions can be locked out for production use.
[High Speed Data Transfer]
Optional Parallel Interface:
High speed standard IEEE 1284 parallel port giving enhanced bi-directional communication.
Download speed is further enhanced by DMA.
Supplied with StagCom95 and cable.
[Specification]
Device Support
EPROMS, EEPROMS, Serial EPROMS, FLASH and Microcontrollers.
Processor
32 bit Embedded RISC Microcontroller with cache memory.
Memory
4 Mbytes (32Mbits) standard. 16 Mbytes (128Mbytes) expansion using 72 pin SIMMs.
Local interface
Display: 20 x 4 character alphanumeric back-lit LCD.
Keypad: Silicon rubber, tactile 23 keys including dedicated program and cursor buttons.
I/O Port
Serial RS232 port with Baud rate selection 1200, thru 115200. Programmable stop bit. Hardware handshaking protocol.
Data transfer to and from all platforms including PC, VAX, SUN, Macintosh.
I/O format selection includes: ASCII, HEX Space, binary, binary rubout, Intel 32 bit, Motorola S-Record, Stag binary, Stag Hex, Extended TEK-Hex.
Dimensions
440 x 260 x 130mm. (17.2 x 10.4 x 5.2").
Electrical Supply
90-263VAC 40-70Hz 60W.
Environmental
EMC Emissions
Complies with EN 50081-1.
EMC Immunity
Complies with EN 50082-1.
Safety
Complies with EN 60950.
Temperature
Operating: 0-35°C.
STAG P803
[제품 설명]
생산용 8갱 프로그래머
스탠드얼론으로 동작하며 PC와 연결 사용도 가능함
초고속 프로그래머로 8/16/32/64/128 메가 플래시메모리에 적합
본체와 4소켓 모듈 어뎁터 두개를 사용
[특 징]
Support for multiple device types and package styles
3V and 5V device support
|
신품 · 중고계측기 전문회사
