클램프 온 파워 로거 PW3360

- • 단상에서 3상 4선까지 지원
- • 표시범위 1000 V, 최대측정전압 780 V
- • 동시에 3상 2선식회로 측정가능(동일 전원 계통)
- • 누설 전류의 측정 가능(50 mA의 옵션 클램프 사용)
- • SD 카드에 수개월의 데이타 저장가능
- • QUICK SET 기능으로 쉽고 정확한 연결지원
- • 고조파 측정 (only PW3360-21)
제품 번호(발주 코드)
특징 | 사이버 견적 | |
---|---|---|
PW3360-20 | 영어 모델, 본체만 | 사이버견적 |
PW3360-21 | 고조파 분석 기능이 있는 영어 모델 | 사이버견적 |
PW3360-10/-11 본체만으로는 측정 할 수 없습니다. 측정 목적에 따라 옵션의 클램프온 센서를 별도 구입 부탁드립니다. 또한 데이터 수집에는 SD 카드가 필요합니다. |
제품 사양
Basic specifications | |
---|---|
Measurement line & number of circuits |
50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 channels |
Measurement items | Pulse input [PW3360-21 only]: Harmonic (level of voltage/current/power, content ratio, phase angle, total value, THD-F, THD-R), up to 40th order |
Voltage ranges | 600 V AC |
Current ranges | 500.00 mA to 5.0000 kA AC (depends on current sensor in use),50.000 mA to 5.0000 A AC (Leak clamp on sensor only) |
Power ranges | 300.00 W to 9.0000 MW (Depends on voltage/current combination and measured line type) |
Basic accuracy |
Voltage : ±0.3% rdg. ±0.1% f.s Current : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy Active power : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy (at power factor = 1) |
Display update rate | 0.5 sec (except when accessing SD card or internal memory, or during LAN/USB communication) |
Save destination | SD Memory card, or internal memory at real time |
Data save interval | 1 sec to 30 sec, 1 minute to 60 minutes, 14 selections |
Save items | Measurement value save: Average only / average, maximum, minimum value [PW3360-21 only]: Harmonic data save: Average only / average, maximum, minimum value in binary format Screen copy: BMP form (saved every 5 min. at minimum interval time) Waveform save: Binary waveform data |
Interfaces | SD memory card HTTP server function, remote settings via communication program, data download USB 2.0: When connected to a PC, the SD Card and internal memory are recognized as removable storage devices, remote settings via communication program, data download Pulse output: proportional to active power consumption when measuring integral power consumption, Isolated open-collector signal |
Functions | Connection check, Quick Set navigation guide, clock, pulse input |
Power supply | AC adapter Z1006: (100 to 240 V AC, 50/60 Hz), 40 VA (including AC adapter) Battery pack 9459: (DC 7.2 V, 3 VA, charging time 6 hr 10 m), 8 hours of continuous use (with back light off) |
Dimensions, mass | 180 mm (7.09 in) W × 100 mm (3.94 in) H × 48 mm (1.89 in) D, 550 g (19.4 oz) without PW9002 180 mm (7.09 in) W × 100 mm (3.94 in) H × 67.2 mm (2.65 in) D, 830 g (29.3 oz) with PW9002 |