2500B 시리즈
> 메이커별제품 > Gigatronics(Spanawave) > 신호 발생기
Microwave Signal Generator / Synthesizer
2500B 시리즈
- • Frequency ranges : 100 kHz to 50 GHz with 0.001Hz resolution
- • Fast Frequency and Level switching time : < 550 μsec for ΔF0≤ 500 MHz
- • Ultra-low Close-in Phase Noise
- • High output power : +13 dBm at 50 GHz
- • Full Suite of Analog Modulation
- • Low Harmonics, Low Spurious
제품 사양
| Model Number |
Freq. Range |
RF Output Connector |
| 2502B |
100 kH to 2.5 GHz |
Type-N (F) |
| 2508B |
2 GHz to 8 GHz |
Type-N (F) |
| 2520B |
2 GHz to 20 GHz |
SMA (F) |
| 2526B |
2 GHz to 26.5 GHz |
SMA (F) |
| 2540B |
2 GHz to 40 GHz |
2.92 mm (F) |
| 2550B |
2 GHz to 50 GHz |
2.4 mm (F) |
| Frequency |
| Range (with Option 18) |
2502B |
100 kHz to 2.5 GHz |
| 2508B |
100 kHz to 8 GHz |
| 2520B |
100 kHz to 20 GHz |
| 2526B |
100 kHz to 26.5 GHz |
| 2540B |
100 kHz to 40 GHz |
| 2550B |
100 kHz to 50 GHz |
| Freq. Accuracy |
Same as time base |
| Freq. Resolution |
0.001 Hz |
| Power Slope |
0 to 0.5 dB/GHz |
| Frequency Stability |
| Internal Reference Output |
10MHz |
TTL level into 50 ohm |
| 100MHz |
> +5 dBm square wave into 50 ohm |
| Aging Rate *1 |
< 5 x 10-10/day |
| Temperature Stability *2 |
< ± 2.5 x 10-8 |
| External Reference Freq. Input |
Frequency |
10 MHz or 100 MHz |
| Frequency Deviation |
±1 ppm |
| Recommended Input Level |
> -5 dBm into 50 ohm for 10 MHz |
| > +5 dBm to +8 dBm into 50 ohm for 100 MHz |
| Reference Tuning |
Voltage Range |
0 to 10 V |
| Sensitivity |
0.50 V/GHz, 0.01 to 20 GHz |
| 0.25 V/GHz, 20 to 50 GHz |
Lock/Level Indicator
(CW Mode Only) |
Sync Out = +5 V (TTL High) |
| 부가설명 |
*1 After 30 days
*2 Temperature stability over operating range of 0°C to +55°C after 30 days
|
옵션
| 옵션 |
설명 |
| 17A |
- Add Internal and External Modulation Suite (includes internal function generator) |
| 17B |
- Add External Modulation Suite |
| 18 |
- Add 100 kHz to 2 GHz Frequency Range (Standard on the 2502B model) |
| 20 |
- Add High RF Output Power |
| 22 |
- Move RF Output Connector to Rear Panel |
| 26D |
- Add 90 dB Mechanical Step Attenuator, for 2550B model only |
| 28 |
- Add Ultra-Low Close-in Phase Noise |
| 29 |
- Add Fast Frequency Switching Speed |
| 32 |
- Add Narrow Pulse Width ≤ 100 ns (Requires Option 17A or 17B) |
| 44 |
- Replace Standard Front Panel with Blank Front Panel (Requires Option 22) |
| 46 |
- Add Rack Slide Kit |
| 제 목 |
파일 다운로드 |
| 등록된 자료가 없습니다. |
