공식대리점 / 총판

품목별제품

114, 115, 116, 117

홈 바로가기 > 품목별제품 > 전기/안전 > 휴대용 디지털 멀티미터(DMM) > Fluke

휴대용 디지털 멀티미터 114, 115, 116, 117
115, 116, 117

  • Fluke 114 : 전기 기사용 멀티미터
  • • AutoVolt: 자동 AC/DC 전압 선택
  • • 어두운 영역에서 작업할 수 있는 대형 백색 LED 백라이트
  • • 저항 및 연속성
  • • 신호 변동을 기록할 수 있는 최소/최대/평균 측정 기능
  • Fluke 115 : 현장 서비스 기술자용 솔루션
  • • 저항 및 연속성
  • • 주파수 및 정전 용량
  • • 최대 전압 ac/dc 600V
  • • 10A AC/DC 전류 측정(최대 30초 동안 20A 과부하)
  • Fluke 116 : 온도 기능 및 마이크로앰프가 포함된 HVAC 멀티미터
  • • HVAC 분야에 적합한 내장형 온도계
  • • 화염 센서를 테스트할 수 있는 마이크로앰프
  • • 낮은 입력 임피던스: 고스트 전압으로 인한 거짓 판독 방지
  • Fluke 117 : 상업 분야용 제품
  • • 비접촉식 전압 검출을 위한 VoltAlert™ 기술
  • • AutoVolt 자동 AC/DC 전압 선택
  • • 낮은 입력 임피던스: 고스트 전압으로 인한 거짓 판독 방지

제품 사양
Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity of 0 % to 90 %.
General specifications
Maximum voltage
(between any terminal and earth ground)		 600 V rms
Safety IEC 61010-1, Pollution Degree 2
IEC 61010-2-033 CAT III 600 V, 10 A
EMC IEC 61326-1: Portable
Fuse for A input (115, 117 only) 11 A, 1000 V, IR 17 kA (Fluke PN 803293)
Display Digital: 6,000 counts, updates 4/sec; Bar Graph: 33 segments, updates 32/sec
Temperature
   Operating -10 °C to +50 °C
   Storage -40 °C to +60 °C
Humidity 0 % to 90 % to 35 °C; 75 % to 40 °C; 45 % to 50 °C
Temperature coefficient 0.1 x (specified accuracy/°C) (< 18 °C or > 28 °C)
Operating altitude 2,000 meters
Battery 9 Volt Alkaline (IEC 6LR61)
Battery life 400 hours typical, without backlight
Certifications CE, CSA, RCM
IP rating (dust and water protection) IP42
Accuracy specifications (all models)
Function Range Resolution Accuracy ± ([% of Reading]+ [Counts]) Model
DC millivolts 600.0 mV 0.1 mV 0.5 % + 2 114, 115, 116, 117
DC volts 6.000 V
60.00 V
600.0 V		 0.001 V
0.01 V
0.1 V		 0.5 % + 2 114, 115, 116, 117
DC, 45 Hz to 500 Hz 500 Hz to 1 kHz
Auto-V LoZ1 true-rms
(114, 116, 117 only)		 600.0 V 0.1 V 2.0 % + 3 4.0 % + 3 114, 116, 117
45 Hz to 500 Hz 500 Hz to 1 kHz
AC millivolts1 true-rms 600.0 V 0.1 V 1.0 % + 3 2.0 % + 3 114, 115, 116, 117
AC volts1 true-rms 6.000 V
60.00 V
600.0 V		 0.001 V
0.01 V
0.1 V		 1.0 % + 3 2.0 % + 3 114, 115, 116, 117
Continuity (115, 116 only) 600 Ω 1 Ω Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer 114, 115, 116, 117
Ohms 600.0 Ω
6.000 kΩ
60.00 kΩ
600.0 kΩ
6.000 MΩ
40.00 MΩ		 0.1 Ω
0.001 kΩ
0.01 kΩ
0.1 kΩ
0.001 MΩ
0.01 MΩ		 0.9 % + 2
0.9 % + 1
0.9 % + 1
0.9 % + 1
0.9 % + 1
5.0 % + 2		 114, 115, 116, 117
Diode test 2.000 V 0.001 V 0.9 % + 2 115, 116, 117
Capacitance (115, 116, 117 only) 1000 nF
10.00 μF
100.0 μF
9999 μF
-		 1 nF
0.01 μF
0.1 μF
1 μF
-		 1.9 % + 2
1.9 % + 2
1.9 % + 2
100 μF to 1000 μF: 1.9 % + 2
> 1000 μF: 5 % + 20		 115, 116, 117
1 All ac ranges except Auto-V LoZ are specified from 1 % to 100 % of range. Auto-V LoZ is specified from 0.0 V. Because inputs below 1 % of range are not specified, it is normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together. For volts, crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale. For amps, crest factor of ≤ 3. AC volts is ac-coupled. Auto-V LoZ, ac mV, and ac amps are dc-coupled.
Accuracy specifications (all models)
Function Range Resolution Accuracy ± ([% of Reading]+ [Counts]) Model
LoZ capacitance (power-up option)
(114, 116, 117 only)		 1 nF to 500 μF 10 % + 2 typical 115, 116, 117
Temperature - K-Type thermocouple
(116 only)		 -40 °C to 400 °C
-40 °F to 752 °F		 0.1 °C
0.2 °F		 1 % + 102
1 % + 182		 116
AC amps true-rms1 (45 Hz to 500 Hz)
(115, 117 only)		 6.000 A
10.00 A
20 A overload for 30 seconds maximum		 0.001 A
0.01 A		 1.5 % + 3 115, 117
AC μAmps true-rms1 (45 Hz to 1 kHz)
(116 only		 600.0 μA 0.1 μA 1.5 % + 3 (2.5 % + 3 > 500 Hz) 116
DC amps (115, 117 only) 6.000 A
10.00 A
20 A overload for 30 seconds maximum		 0.001 A
0.01 A		 1.0 % + 3 115, 117
DC μAmps true-rms (116 only) 600.0 μA 0.1 μA 1.0 % + 2 116
Hz (V or A input)2
(Hz A 115, 117 only)		 99.99 Hz
999.9 Hz
9.999 kHz
50.00 kHz		 0.01 Hz
0.1 Hz
0.001 kHz
0.01 kHz		 0.1 % + 2 115, 117
Hz (V input)3
(115, 116, 117 only)		 99.99 Hz
999.9 Hz
9.999 kHz
50.00 kHz		 0.01 Hz
0.1 Hz
0.001 kHz
0.01 kHz		 0.1 % + 2 116
1 All ac ranges except Auto-V LoZ are specified from 1 % to 100 % of range. Auto-V LoZ is specified from 0.0 V. Because inputs below 1 % of range are not specified, it is normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together. For volts, crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale. For amps, crest factor of ≤ 3. AC volts is ac-coupled. Auto-V LoZ, ac mV, and ac amps are dc-coupled.
2 AC Volts Hz is ac-coupled and specified from 5 Hz to 50 kHz. AC Amps Hz is dc-coupled and specified from 45 Hz to 5 kHz. Amps input burden voltage (typical): 6 A input 2 mV/A, 10 A input 37 mV/A.
3 Frequency is ac-coupled, 45 Hz to 50 kHz.
Frequency counter sensitivity (models 115, 116, 117)
Input range Typical sensitivity (rms sine wave)
5 Hz to 45 Hz 45 Hz to 5 kHz 5 kHz to 10 kHz 10 kHz to 50 kHz
Volts AC V
60 V
600 V		 0.2 V
2 V
20 V		 0.2 V to 0.3 V
2 V to 3 V
20 V to 30 V		 0.3 V to 0.4 V
3 V to 4 V
30 V to 40 V		 0.4 V to 1.0 V
4 V to 10 V
40 V to 100 V
AC Amps
(115, 117 only)		 6 A
10 A		 N/A
N/A		 0.4 A
0.5 A		 N/A
N/A		 N/A
N/A
Input characteristics (all models)
Function Input impedance (nominal) Common mode rejection ratio (1 kΩ unbalanced) Normal mode rejection
Volts AC > 5 MΩ < 100 pF > 60 dB at dc, 50 or 60 Hz
Volts DC > 10 MΩ < 100 pF > 100 dB at dc, 50 or 60 Hz > 60 dB at 50 or 60 Hz
Auto-V LoZ
(114, 116, 117 only)		 ~3 kΩ < 500 pF > 60 dB at dc, 50 or 60 Hz
Open circuit test voltage Full scale voltage Short circuit current
Ohms < 2.7 V dc To 6.0 MΩ 40 MΩ < 350 μA
< 0.7 V dc < 0.9 V dc
Diode test
(115, 117 only)		 < 2.7 V dc 2.000 V dc < 1.2 mA
자료실
제 목 파일 다운로드
등록된 자료가 없습니다.