MS46121B
> 품목별제품 > 네트워크 분석기 > Anritsu
ShockLine™ 1-포트 USB VNA MS46121B
MS46121B는 150kHz ~ 6GHz의 주파수 범위를 갖는 PC 제어식 1-포트 USB ShockLine 벡터 네트워크 분석기 시리즈입니다. MS46121B는 테스트 중인 장치에 직접 연결할 수 있을 정도로 충분히 작은 공간 절약형 솔루션이며 저비용으로 1포트 측정에 필요한 성능과 정확성을 제공합니다. MS46121B 시리즈의 모든 제품은 제조, 엔지니어링 및 교육 분야에서 RF 및 마이크로파 제품에 적용할 수 있도록 제조되었습니다. 2가지 MS46121B 옵션 모두 포인트 스위프 속도당 120마이크로초(µs)이며 측정 정확도가 +/- 0.5dB(-6dB 오프셋, 통상)로 매우 뛰어나, 패시브 장치 테스트 적용 분야에 적합합니다.
- • 1-포트 VNA, 주파수 옵션 범위 150kHz – 6GHz
- • 외부 PC 컨트롤을 통해 여러 MS46121B를 병렬로 제어할 수 있어 멀티사이트 처리량이 탁월합니다.
- • 초소형 패키지로 DUT에 직접 연결할 수 있습니다.
- • (1대1) 또는 (1대n) 구성의 스칼라 전송 측정 가능.
- • 온보드 데이터 저장소를 사용하면 보안 적용 분야에서 데이터 청소를 할 필요가 없습니다.
- • 시간 게이팅 기능이 있는 표준 대역-통과 시간 도메인을 사용하면 더욱 쉽고 빠르게 결함을 식별할 수 있습니다.
- • ShockLine 제품군 내에서 공동 GUI 인터페이스를 사용하면 모델 간 전환 비용이 절감됩니다.
제품 사양
| Specification | ||
|---|---|---|
| Frequency Range | MS46121B-006 | 150 kHz to 6 GHz, type N(m) 1-Port |
| Output Power | 150 kHz to 46 MHz | –5 dBm |
| > 46 MHz to 4 GHz | +3 dBm | |
| > 4 GHz to 6 GHz | –5 dBm | |
| Data Points | 2 to 20,001 points | |
| IF Bandwidth (All IFBW settings applicable with Option 21 enabled.) |
10, 20, 30, 50, 70, 100, 200, 300, 500, 700 Hz 1, 2, 3, 5, 7, 10, 20, 30, 50, 100 kHz |
|
| Markers | 12 markers + 1 reference marker | |
| Test Port 1 | N(m) | |
| Damage Input Levels | +23 dBm maximum, ±50 VDC maximum | |
| Recommended External PC Configuration | CPU | Intel® Core™ i5-6300U Processor |
| RAM | 4 GB | |
| Disk | 120 GB | |
| DirectX | Version 9 with Windows Display Driver Model (WDDM) installed | |
| USB | One USB 2.0 (or higher) type A port per MS46121B used | |
| Dimensions | 52 mm x 148 mm 36 mm | |
| Weight | < 0.4 kg | |
옵션 & 악세서리
| Standard Accessories | |
|---|---|
| USB-A to Micro-B with latch cable, 2000-1816-R, 1.8 m (6 ft) Getting Started with Anritsu Flier, provides access to all ShockLine web content and services. |
|
| Instrument Models | |
| Base Model | MS46121B, ShockLine™ 1-Port USB VNA |
| Required Option | MS46121B-006, 150 kHz to 6 GHz, type N(m) port |
| Main VNA Option | |
| MS46121B-002 | Low Pass Time Domain |
| MS46121B-021 | Scalar Transmission Measurement |
| Precision Automatic Calibrator Module | |
| MN25208A | 2-port USB SmartCal Module, 300 kHz to 8.5 GHz |
| MN25408A | 4-port USB SmartCal Module, 300 kHz to 8.5 GHz |
| MN25218A1 | 2-port USB SmartCal Module, 300 kHz to 20 GHz |
| MN25418A | 4-port USB SmartCal Module, 300 kHz to 20 GHz |
| 36585K-2M | K Connector Precision AutoCal Module, 70 kHz to 40 GHz, K(m) to K(m) |
| 36585K-2F | K Connector Precision AutoCal Module, 70 kHz to 40 GHz, K(f) to K(f) |
| 36585K-2MF | K Connector Precision AutoCal Module, 70 kHz to 40 GHz, K(m) to K(f) |
| 2000-1809-R | Serial to USB Adapter (required for use with 36585 AutoCal module if control PC does not have a serial port) |
| 1. Applies to Rev 2 SmartCal Modules. MN25218A with serial numbers <1817999 operate from 1 MHz to 20 GHz | |
| Mechanical Calibration Kits | |
| 3653A | N Connector Calibration Kit, Without Sliding Loads |
| OSLN50A-8 | Precision N Male Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω |
| OSLNF50A-8 | Precision N Female Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω |
| TOSLN50A-8 | Precision N Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω |
| TOSLNF50A-8 | Precision N Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω |
| RF Cables and Adapters | |
| 1091-26-R | SMA(m) to N(m), DC to 18 GHz, 50 Ω |
| 1091-27-R | SMA(f) to N(m), DC to 18 GHz, 50 Ω |
| 1091-80-R | SMA(m) to N(f), DC to 18 GHz, 50 Ω |
| 1091-81-R | SMA(f) to N(f), DC to 18 GHz, 50 Ω |
| 71693-R | Ruggedized adapter, K(f) to N(f), DC to 18 GHz, 50 Ω |
| 34NK50 | Precision Adapter, N(m) to K(m), DC to 18 GHz, 50 Ω |
| 34NKF50 | Precision Adapter, N(m) to K(f), DC to 18 GHz, 50 Ω |
| 34NFK50 | Precision Adapter, N(f) to K(m), DC to 18 GHz, 50 Ω |
| 34NFKF50 | Precision Adapter, N(f) to K(f), DC to 18 GHz, 50 Ω |
| K220B | Precision Adapter, DC to 40 GHz, K(m) to K(m), 50 Ω |
| K222B | Precision Adapter, DC to 40 GHz, K(f) to K(f), 50 Ω |
| K224B | Precision Adapter, DC to 40 GHz, K(m) to K(f), 50 Ω |
| Test Port Cables, Flexible, Ruggedized, Phase Stable | |
| 15NNF50-1.0B | 1.0 m (39”), DC to 18 GHz, Test Port Cable, Flexible, Phase Stable, N(f) to N(m), 50 Ω |
| 15NNF50-1.5B | 1.5 m (59”), DC to 18 GHz, Test Port Cable, Flexible, Phase Stable, N(f) to N(m), 50 Ω |
| 15NN50-1.0B | 1.0 m (39”), DC to 18 GHz, Test Port Cable, Flexible, Phase Stable, N(m) to N(m), 50 Ω |
| 15LL50-1.0A | 1.0 m (39”), DC to 20 GHz, Test Port Cable, Armored, Phase Stable, 3.5 mm(m) to 3.5 mm(m), 50 Ω |
| 15LLF50-1.0A | 1.0 m (39”), DC to 20 GHz, Test Port Cable, Armored, Phase Stable, 3.5 mm(m) to 3.5 mm(f), 50 Ω |
| 15KK50-1.0A | 1.0 m (39”), DC to 20 GHz, Test Port Cable, Armored, Phase Stable, K(m) to K(m), 50 Ω |
| 15KKF50-1.0A | 1.0 m (39”), DC to 20 GHz, Test Port Cable, Armored, Phase Stable, K(m) to K(f), 50 Ω |
| Tools | |
| 01-200 | Calibrated Torque End Wrench, GPC-7 and Type N |
| 01-201 | Torque End Wrench, 5/16 in, 0.9 N·m (8 lbf·in) (for tightening male devices, for SMA, 3.5 mm, 2.4 mm, K, and V connectors) |
| 01-203 | Torque End Wrench, 13/16 in, 0.9 N.m (8 lbf.in) (for tightening ruggedized SMA, 2.4 mm, K and V test port connectors) |
| 01-204 | End Wrench, 5/16 in, Universal, Circular, Open-ended (for SMA, 3.5 mm, 2.4 mm, K, and V connectors) |
